Stop a Sewer Backup & Find Out What's Causing It

Sewer backup repair to locate blockages and other sewer line problems, restore proper drainage, and determine why the backup occurred.

Sewer Backup

A single clogged fixture doesn't necessarily mean your main sewer line is backed up.

clogged fixture

A single clogged fixture doesn't necessarily mean your main sewer line is backed up.

sewer camera inspection

A sewer camera can provide valuable information when the cause of repeated backups isn't clear.

plumbing repair

The plumbing repair should stop additional wastewater from backing up, while cleanup addresses the material that has already entered the home.

When Should You Call a Plumber?

If you’re experiencing sewage backing up into your drains, toilets, or home, it’s time to call a professional plumber to stop the sewer backup and identify the cause.

Few plumbing problems are as disruptive as wastewater coming back into your home. A sewer backup can send contaminated water into toilets, tubs, showers, floor drains, or other low points in the plumbing system and may make it difficult to safely use your home's plumbing until the problem is corrected.

2 Sons Plumbing and Sewer provides sewer backup repair to locate blockages and other sewer line problems, restore proper drainage, and determine why the backup occurred. If the problem keeps returning, we can investigate whether roots, damaged piping, or another underlying sewer condition is contributing to it.

If your sewer is backing up, call 2 Sons Plumbing and Sewer at (206) 487-1757 to schedule service.

Sewer-Backup

What Should You Do During a Sewer Backup?

The first thing to do is stop sending more water into the drainage system whenever possible.

Don't flush toilets, run sinks, take showers, use the washing machine, or operate the dishwasher. If the main sewer line is blocked, additional wastewater may have nowhere to go and could increase the amount backing up into the home.

Avoid direct contact with sewage and keep children and pets away from affected areas. Wastewater can contain bacteria and other contaminants that create health risks.

Once water use has stopped, the next priority is finding where the sewer system is blocked or damaged.

How Do You Know It's a Main Sewer Backup?

A single clogged fixture doesn't necessarily mean your main sewer line is backed up.

When the problem affects multiple fixtures, however, a larger drainage problem becomes more likely.

Common signs include:

Water backing up into a bathtub or shower
Multiple drains becoming slow at once
Toilets gurgling or bubbling
Toilets that won't flush normally
Sewage odors from drains
Water appearing in one fixture when another is used
Backups at lower-level plumbing fixtures
Recurring problems after previous drain cleaning

For example, if flushing a toilet causes water to rise in a nearby bathtub, both fixtures may be reacting to a blockage farther downstream.

What Causes a Sewer Line to Back Up?

A sewer backup occurs when wastewater can't move through the drainage system normally.

The cause could be an obstruction inside an otherwise functional pipe or a physical problem with the sewer line itself.

Possible causes include:

Accumulated debris
Grease buildup
Foreign objects
Tree root intrusion
Cracked sewer piping
Shifted or separated pipe sections
Deteriorating sewer lines
Heavy buildup inside the pipe
Structural conditions that repeatedly catch waste

Finding the cause is especially important when the sewer has backed up more than once.

Clearing the Sewer Line

When an obstruction is responsible for the backup, the immediate goal is to restore wastewater flow.

Professional sewer or drain-cleaning equipment can be used to address the blockage based on its location, severity, and the condition of the piping.

Once the obstruction is cleared, fixtures can begin draining normally again.

However, getting the water moving doesn't always mean the underlying problem has disappeared. If roots entered through a damaged joint or a broken section of sewer pipe is collecting debris, another backup can develop later.

Sewer-Backups

Why Does My Sewer Keep Backing Up?

One sewer clog may be an isolated event. Repeated sewer backups are different.

If the same line has been cleared several times and continues to clog, there may be a reason the obstruction keeps forming.

Tree roots could be growing through a crack or deteriorated connection. A damaged section of pipe might be catching waste. The line may have shifted, or older piping may have deteriorated enough to interfere with normal flow.

Repeatedly cleaning the line can provide temporary relief without correcting these conditions.

When backups become recurring, investigating the pipe itself can help determine whether additional repair is necessary.

When Is a Sewer Camera Inspection Needed?

A sewer camera can provide valuable information when the cause of repeated backups isn't clear.

Once the line is accessible and sufficiently clear, a camera can be moved through portions of the sewer pipe to look for roots, cracks, separated connections, deterioration, obstructions, and other visible problems.

The findings can help determine whether sewer cleaning solved the problem or whether a damaged section of pipe needs attention.

A camera inspection can also help avoid unnecessary sewer work by showing when the accessible pipe appears to be in reasonable condition.

Plumbers, Sewer, Snake, Camera., A, Snake, Camera, Checks, The, Inside

Does a Sewer Backup Mean I Need a New Sewer Line?

No.

A backup by itself doesn't mean the entire sewer line needs replacement.

If the pipe is structurally sound and simply clogged, clearing the obstruction may be all that's necessary. Even when damage is found, an isolated problem may sometimes be addressed with a targeted sewer repair.

Replacement becomes more worth considering when inspection reveals widespread deterioration, multiple damaged areas, or repeated failures throughout the line.

At 2 Sons Plumbing, the goal is to understand the condition of the sewer before recommending how extensive the solution should be.

What About the Sewage Inside the Home?

Repairing the sewer line and cleaning contaminated areas inside the home are two different jobs.

Once the plumbing problem has been corrected, materials affected by sewage may require appropriate cleaning, disinfection, or restoration depending on the extent of contamination.

Avoid handling significant sewage contamination without proper protection.

The plumbing repair should stop additional wastewater from backing up, while cleanup addresses the material that has already entered the home.

Get Your Sewer Flowing Again

A sewer backup isn't something you want to experience twice. Restoring drainage is the immediate priority, but understanding why the backup happened can be just as important—especially when you've had previous problems.

2 Sons Plumbing and Sewer can clear sewer blockages, diagnose recurring backups, inspect sewer piping, and determine whether damaged sections need repair.

Call 2 Sons Plumbing and Sewer at (206) 487-1757 to schedule sewer backup repair.